Arc Flash Training Builds Hazard Awareness for Safer Workplaces
Published on November 17, 2026 by Staff Writer

Online arc flash training gives workers a flexible way to learn about electrical hazards. JADE Learning offers self-paced, state-approved NFPA 70E continuing education courses for electricians renewing their licenses in 16 states.
If you’re arranging electrical safety training for other employees, you can explore JADE Learning Business Solutions.
Training in arc flash safety covers electrical hazards, safe work practices, and emergency response. Online instruction can help you apply NFPA 70E and support compliance with applicable OSHA regulations.
The employer remains responsible for meeting workplace training and safety requirements.
Online Arc Flash Training
Self-Paced Format
With self-paced online courses, you can work through the material on your own schedule. JADE Learning’s self-paced courses are available 24/7 on internet-connected devices. You can stop and resume where you left off, whether you complete the course in one sitting or over several sessions.
Instructor-Led Format
Live web-based courses let you interact with an instructor in real time. In JADE Learning’s broader catalog, virtual instructor-led classes run at scheduled dates and times and require a webcam.
In its July 24, 2014, interpretation letter on web-based electrical training, OSHA addressed a specific setup that combined live, interactive instruction, checks for understanding, and a local skills demonstration suited to the risk of the work. OSHA said that method meets the training-format requirement in 29 CFR 1910.332(c) if employees demonstrate the knowledge and skills their work requires.
Course Content
Online courses often use video, audio narration, text, and graphics to build electrical safety understanding. These materials explain arc flash and arc blast hazards, safety controls, and emergency response procedures. Topics can also include hazard identification, risk assessment, lockout/tagout procedures, and personal protective equipment.
Course Completion and Practical Evaluation
A certificate of completion documents that you completed a course. When you finish a JADE Learning course, you can download your certificate from your account and receive a copy by email. If your work requires you to be a qualified person, your employer must also verify that you can apply the knowledge and skills needed for your assigned tasks.
Pro-tip: Reinforce your online coursework through supervised practice with the equipment and procedures you use on the job. Equipment inspections, drills, and simulated incident responses give you a chance to apply what you learned and discuss questions with a qualified supervisor. Document your practice and revisit the course material when you need to clarify a procedure.
Course Detail | What to Expect |
Cost | Pricing varies by course and state. Select your state in JADE Learning’s course catalog to see available options. |
Time | Course length varies by course and state. If a lesson has a minimum time requirement, JADE Learning displays it in the course. |
Retraining | NFPA 70E calls for retraining in safety-related electrical work practices at least every three years. Changes in job duties, equipment, or procedures can require earlier retraining. |
OSHA and NFPA 70E Standards
OSHA Regulations
The OSHA regulations that apply depend on the work. General industry electrical safety requirements appear in 29 CFR 1910 Subpart S. Section 1910.269 covers operation and maintenance in electric power generation, transmission, and distribution. In construction, 29 CFR 1926 Subpart K covers electrical safety, and Subpart V covers electric power transmission and distribution.
The training requirements in 29 CFR 1910.332 apply to employees whose risk of electric shock remains above a safe level after the applicable electrical installation requirements are met. The standard calls for classroom or on-the-job training, with the extent of training determined by the risk to the employee.
NFPA 70E
The NFPA 70E standard sets out safety-related work practices to help protect workers from shock, electrocution, arc flash, and arc blast. It is a consensus standard that can help workplaces meet applicable OSHA electrical safety requirements.
Who Needs Training?
Online arc flash safety training can serve both qualified and unqualified personnel. Qualified electrical workers need training specific to their tasks and equipment. Courses based on NFPA 70E can help unqualified personnel recognize hazards relevant to their jobs. Maintenance personnel, machine operators, and janitorial staff may need awareness training if their duties expose them to electrical hazards.
Hazard Recognition for Arc Flash and Shock
Training on arc flash hazards typically covers common electrical risks. OSHA’s arc flash fact sheet explains these hazards and ways to reduce exposure. Common course topics include the following:
- Electrical hazard recognition, including how arc flash and shock occur and what injuries they can cause.
- Risk assessment procedures to evaluate the likelihood and severity of injury.
- Label interpretation to identify electrical hazards and the precautions a task requires.
Personal Protective Equipment
Training covers selecting and inspecting personal protective equipment (PPE) in line with NFPA 70E standards for shock and arc flash protection. Depending on the task and hazards, PPE may include rubber insulating gloves for shock protection, along with arc-rated clothing and appropriate face protection for arc flash exposure. Arc-rated clothing is flame-resistant and has been tested and assigned an arc rating for arc flash protection.
Safe Work Practices and Approach Boundaries
Under 29 CFR 1910.333, de-energization of equipment is generally required before employees work on or near exposed live parts. The rule allows exceptions when de-energization introduces additional hazards or is infeasible because of equipment design or operational limitations. When establishing electrically safe work conditions, lockout/tagout (LOTO) procedures help prevent accidental re-energization, and a qualified person verifies the absence of voltage.
Identification of approach boundaries depends on the hazard. The limited and restricted approach boundaries address electric shock from exposed energized parts, and their distances depend on voltage. The arc flash boundary addresses burn risk and is based on the incident energy from a potential arc flash. It can fall inside or outside the shock approach boundaries, so both types of boundary must be considered when both hazards are present.
