The method for measuring the countertop space for peninsulas has been changed for 2017. We know that NEC Section 210.52 requires that at least one receptacle be provided for each island or peninsula countertop that fits the dimensional requirements. The intent of the Code here is to discourage the use of extension cords. For example, countertop outlets must be spaced so that the typical two-foot extension cord can reach an outlet from any part of the countertop. Previously, the minimum distance triggering the outlet requirement was measured from the junction where the peninsula abutted the front edge of the perpendicular countertop, thus usually requiring an outlet mounted in the peninsular base cabinet. The new method of measurement begins at the wall behind the countertop.
Ground fault protection is not new, having been introduced in the 1971 edition of the National Electrical Code. GFCI devices have saved many lives since then by preventing shock and electrocution. As you may know, they contain a small transformer that detects current leakage from the phase to the grounded (neutral) conductor. That is why they work even in circuits that do not have a separate grounding conductor. These devices are designed to interrupt current when the leakage reaches a threshold of 4 to 6 mA, just shy of the amount of current that can cause injury to the human body.
The 2017 NEC now requires meeting rooms measuring 1,000 square feet or less to be equipped with 125-volt 15 or 20 ampere receptacles. This new requirement will help serve today’s trend that requires we travel with a myriad of electronic devices to meet our daily personal and business needs.
This new Code-reference, 210.71 Meeting Rooms, is found in Article 210 Branch Circuits, Part III. Required Outlets, and is only applicable to meeting rooms or areas measuring 1,000 square feet or less. The qualifying room or area is to be determined by measuring wall-to-wall space, as well as space created using movable partitions.
The Isolated Ground (IG) is a type of equipment ground that, in theory, reduces interference experienced by electronics and instrumentation from radio frequency (RF) noise, by connecting that equipment directly to the grounding terminal of the service equipment, without ever making contact with another metal component or grounded surface, that could potentially be serving as an antenna for airborne RF noise.
The NEC has long regulated the required space around electrical equipment installations so that a worker who is going to examine, adjust, service, or maintain equipment that may be energized is not exposed to excessive danger from live (ungrounded) parts. The worker must have enough space available so as not to contact a surface that could effectively make his body a path to ground. In the past, equipment installations above a drop ceiling, such as small transformers, air handlers, VAV’s, and the like, have not been addressed, and the enforcement of Article 110.26 in these spaces has been difficult at best, as the space above a drop ceiling is often very crowded.
Inrush current, also referred to as “locked rotor current,” is the excessive current flow experienced within a motor and its conductors during the first few moments following the energizing (switching on) of the motor. This current draw is sometimes referred to as “locked rotor current” because the current necessary at startup to […]
The NEC underwent some big changes in 2017, including the redefinition of wall space, when it comes to fixed cabinets installed along a wall space. Prior to 2017, a cabinet affixed to a wall in a bedroom, den, library, etc. simply broke that wall space into two separate wall spaces. The measurement along the wall ended once you reached the fixed cabinet, and a new measurement began at the other end of the cabinet – but not anymore!
As 2019 begins, the electrical industry is in a state of change with proposed changes to the 2017 NEC codes. As technologies have changed so have the needs to keep electrical safety current to these changes.
The Oregon electrical license renewal deadlines for Limited Journeyman Manufacturing Plant Electrician (PJ), Limited Energy Technician Class A (LEA), Limited Energy Class B (LEB), Limited Maintenance Electrician (LME), Limited Renewable Energy Technician (LRT), and Limited Journeyman Sign Electrician (SIG) are approaching on October 1, 2017. The Oregon Building Codes Division […]
Don't wait for an Electrical Inspector to teach you the 2023 NEC. Save time, money, and pass inspections the first time by completing our online continuing education courses.