Furnace | JADE Learning

Preparing for the Wisconsin Electrical Journeyman Exam

To help you prepare for the Wisconsin Journeyman Electrician Exam, we’ve gathered some information on what you can expect on the exam — plus some tips to help you pass.

Read Article

Most Recent

How to Prepare for the Washington Electrical Exam

Before you become a journey-level or master electrician in Washington, you must pass an exam. Here’s what you can expect on the exam and some tips to help you pass.

Read Article
How Electricians Can Make Money Installing EV Charging Stations

Tap into the growing demand for electric vehicle charging stations to increase your income and reach new customers as a licensed electrician.

Read Article
2023 NEC Section 210.8(B): GFCI Protection, Other Than Dwelling Units

These are some updated code changes and exceptions in section 210.8(B), which covers GFCI rules for personnel, other than dwelling units.

Read Article
The De-Centralized Central Station

This blog discusses the sustainability of central alarm stations hiring remote workers and the pros and cons that come with remote vs. in-person work.

Read Article

Recently in

Venting Systems for Mid-Efficiency Furnaces

A vent is defined as a pipe or conduit that contains a passageway for conveying combustion products and air to the atmosphere. Products of combustion contain carbon dioxide, water, and sometimes carbon monoxide. Therefore, it is important to safely vent a gas furnace.

Modern gas furnaces are available with efficiencies that range from 80% to 98% Annual Fuel Utilization Efficiency (AFUE) ratio. Furnaces that are 90 to 98% AFUE are considered very efficient and utilize a category 4 vent system. This means that the flue gases operate under a positive vent stack pressure with a low vent gas temperature, causing the gases to condense before discharging from the vent. Venting materials used for category 4 furnaces are those recognized by the furnace’s installation instructions such as stainless steel, PVC, and ABS. Furnaces one tier lower in efficiency use more traditional venting methods than the 90+% units. Even though these systems are associated with conventional chimneys and vents, special attention must be given to their installation.

Read Article

Venting Gas Furnaces into Masonry Chimneys

The combining of fuel, air and an ignition source creates combustion. This combustion process is utilized in furnaces and water heaters to heat air or water. Byproducts of combustion are carbon dioxide, water, occasionally carbon monoxide and other gases.

Read Article

Preparing for the Wisconsin Electrical Journeyman Exam

Most Recent

How to Prepare for the Washington Electrical Exam

How Electricians Can Make Money Installing EV Charging Stations

2023 NEC Section 210.8(B): GFCI Protection, Other Than Dwelling Units

The De-Centralized Central Station

Recently in

Venting Systems for Mid-Efficiency Furnaces

Venting Gas Furnaces into Masonry Chimneys

Passing Your Journeyman or Master Exam Starts Here.

JADE Learning’s Online Exam Preparation. Practice at Home. On Your Schedule.

Login